The best printable parts for machines you love.

We hunt down the good version of every part — the trapdoor cover that actually fits, the bracket everyone recommends — and point you straight to the designer who made it. Free files, honest verdicts, no digging through four platforms.

4 launch collections
4 hand-checked objects
100% free from the designers
We link out — designers host the files
Every link checked monthly

Featured collection: Amiga Parts

The pieces Amiga owners end up needingSee the collection →

Amiga 1200 Back Trapdoor — HDMI, MicroSD and USB

Fits: Amiga 1200 rear trapdoor · built for PiStorm32 setups

The back trapdoor that finishes a PiStorm32 build: HDMI, USB and microSD on the rear panel, with the support designed in.

by rainbowat · MakerWorld
Personal use105 downloads53 prints
Print this: built-in support, no slicer supports needed · hardware: 1x M3x6 screw + nut · needs HDMI + microSD extension cables (see designer’s page)
Get the filesfree, on the designer’s page ↗ Read our verdict →

Commodore Stand for Amiga 500, 600 and 1200 — With Logo

Fits: Amiga 500, 600 and 1200 · also C64C, C128, Plus/4 and C116

One stand for the whole wedge family — A500, A600, A1200 and the 8-bit wedges too — with the Commodore logo in the print.

by stroke.lugaresi · MakerWorld
Standard Digital File License110 downloads69 prints
Print this: 0.2mm layers · 2 walls · 15% infill · about 2.5 hours · PLA, about 95 g
Get the filesfree, on the designer’s page ↗ Read our verdict →

Amiga 1200 Motherboard Shim — Fit an A1200 Board in a PC Case

Fits: Amiga 1200 motherboard · ITX/ATX PC cases

Rehousing an A1200 board in a modern PC case? This shim matches its three screw holes to ITX/ATX mounting. Designer-confirmed: not for the A500.

by madninja · MakerWorld
CC BY-NC-SA9 downloadsRated 5.0
Print this: designer’s profile: 0.8mm nozzle · 0.4mm layers · 2 walls · 15% infill · PLA, about 103 g · prints on 2 plates
Get the filesfree, on the designer’s page ↗ Read our verdict →

2.5-Inch HDD Adaptor for Amiga 1200 Drive Swaps

Fits: Amiga 1200 (designer’s own use) · older machines with non-standard drive hole patterns

Newer 2.5-inch drives are thicker, with holes in the wrong places. This bracket fixes both — the designer used it in an A1200.

by adesillas · MakerWorld
CC BYNo supports
Print this: no supports · no raft · 0.20mm resolution · 20% infill · PLA (designer printed on an Ender 3)
Get the filesfree, on the designer’s page ↗ Read our verdict →

Collections

Start with the machine on your desk

Amiga Parts

Trapdoors, brackets, stands, drive mounts and case parts for Commodore’s machines

Console Parts & Stands

Controller mounts, battery doors, shells, stands and storage for classic consoles

Arcade Parts

Joystick and button parts, brackets, panels and mounts for cabinets and sticks

Printer Upgrades

Parts that make the printer better at printing — mounts, guides and tool holders

How Objectibles works

STEP 1

We hunt

Every candidate is compared against the other versions of the same part, across Printables, MakerWorld, Thingiverse and Cults.

STEP 2

We give the verdict

What it fits, what to print it in, how long it takes, and the license — checked against the designer’s page, credited by name.

STEP 3

You download free

The button takes you to the designer’s own page. They host the files and get the credit; you always get the latest version.

Designers: this site exists to send you people.

Listings are free, credited, and removable on request — no questions asked. If you make parts for classic machines, we want your work in the collections.

Submit a design

Objectibles links to designers’ pages; it does not host model files. Every entry names its designer and shows the license as published on their page.